4-Hole Tuf-Tite Distribution Box #4HD2
4-Hole HDPE Distribution Box. Comes complete with lid and
4 fittings (orange plug, yellow seal thin wall pipe, or blue seal for Sch. 40).

***(Please specify which 4 fittings you want in the
special instructions box of the cart when ordering.) ***

• Injection molded. Exceptionally strong.
• HDPE is non-corrosive in a septic environment.
• Patented snap-in pipe seals simplify installation

If you would like a different another lid shown below with your box instead of the regular lid, please note that in the special instructions box also.

Optional Tuf-Tite Drain Grate #B1-DG
This is an optional drain grate for the 4HD2 Distribution Box shown above. Price includes Drain Grate or Regular Lid only.
The distribution box is not included.

Optional 6" Tuf-Tite Box Riser 11"x11"
Optional 6 inch Riser for 4HD2 Distribution Box. Provides elevation to the box or riser. Price includes Riser only.
The distribution box and lid are not included.

$21.50
Item#B1-RIS

6-Hole Tuf-Tite Distribution Box #6HD2
6-Hole HDPE Distribution Box. Comes complete with a lid and your choice of 6 fittings (orange plug, yellow seal, or blue seal) and lid.

(Please specify which 6 fittings you want in the
special instructions box of the cart when ordering.)

• Injection molded. Exceptionally strong.
• HDPE is non-corrosive in a septic environment.
• Patented snap-in pipe seals simplify installation

7-Hole Tuf-Tite Distribution Box #7HD2
7-Hole HDPE Distribution Box. Comes complete with a lid and your choice of 7 fittings (orange plug, yellow seal, or blue seal) and lid.


(Please specify which 7 fittings you want in the
special instructions box of the cart when ordering.)

• Injection molded. Exceptionally strong.
• HDPE is non-corrosive in a septic environment.
• Patented snap-in pipe seals simplify installation

Optional 6" Tuf-Tite Box Riser
Optional 6 inch Riser for 7HD2 Distribution Box shown above. Stackable HDPE Risers extend to grade in 6" increments. 
Accept 16" x 16" screw-on lid or grate.
#B4-RIS
$22.00

16" x 16" Tuf-Tite Regular Lid
This lid fits the 7HD2 box shown above,
as well as the B4-RIS Riser shown above.
#B4-RL
$24.50

9-Hole Tuf-Tite Distribution Box #9HD2
9-Hole HDPE Distribution Box. Comes complete with a lid and your choice of 9 fittings (orange plug, yellow seal, or blue seal) and lid.


(Please specify which 9 fittings you want in the
special instructions box of the cart when ordering.)

• Injection molded. Exceptionally strong.
• HDPE is non-corrosive in a septic environment.
• Patented snap-in pipe seals simplify installation

Additional Seal - Yellow
Polyethylene seal for watertight connection between pipe and Tuf-Tite Box.  Will not crack or corrode in septic conditions. They stay pliable and watertight permanently. Watertight! Fits Model 4HD2 distribution box.

S-35: Yellow seal for thin-wall pipe (Sewer and Drain, SDR 35, ASTM 3034, 1500lb. Crush)
S-40: Blue seal for Sch. 40 pipe, 4" Corrugated pipe
P-10: Orange Plug for unused holes

FREE SHIPPING when ordered with the distribution boxes!
$1.99 each

Tuf-Tite Speed Leveler
Additional Speed Leveler for Distribution Boxes shown above. No faster, easier, better, or more economical way to equalize distribution box flow!
For 3" or 4” PVC pipes
Speed Levelers are precision engineered to fit commonly used Schedule 40 Thick-Wall, SDR 35 (3034), and 2729 Thin-Wall PVC pipes. Simply press the Levelers into the pipe ends. They fit water-tight.
No tools are necessary.
Non-corrosive polyethylene. Hand-adjustable.