Low Prices! Largest Selection! Best Service!

Need Help?

FAST & FREE SHIPPING
(on most items)


No Illinois Sales Tax For
Orders Outside Of IL

Company Home Page

View Cart/Check Out


Secure Shopping

ORDER ONLINE OR CALL OUR FRIENDLY SALES STAFF TO PLACE AN ORDER BETWEEN 7:30am & 4:30pm CST MON-FRI.
Toll Free:  1-877-925-5132  Most orders placed before 1:30pm CST will be shipped the same day.
Alarm Details & Specificiations
   

Model RAB 202

Power Specifications:

Input power: 120 VAC, 60 Hz, 1 Phase, 20 Amps
Pump: 120 VAC, 20 Amp C/B, 1 Hp max.
Compressor: 120 VAC, 10 Amp C/B, 1/2 Hp max.
Alarm: 120 VAC, 10 Amp C/B, Alarm/Control power.

Control Features:
Pump Control: Pump on/off is controlled by the water level at the pump float. Includes Pump Test switch to verify operation of the effluent pump. Individual circuit breakers provide short circuit protection and disconnect feature for compressor, pump, and alarm circuit.

Alarm: Visual and audible (90 dB) alarm for High Water and Low Air Pressure faults. Includes Mute/Test
switch to verify operation of the alarm circuits and to silence the audible alarm until fault is cleared.

Enclosure: 8”X8”X4”poly enclosure rated NEMA 4X (waterproof)

Certifications:
NSF/ANSI Standard 40 approved UL Listed (UL508A) Control Panel for USA/Canada

Model 202 System Component Requirements:
High Water Alarm float –Rated 120VAC, 1 Amp min.
Pump float –Rated 120VAC, 20 Amps (1 Hp) min.
Pump –120VAC, 1 Hp Max, UL approved with
internal thermal protection.
Compressor –120VAC, 1/2 Hp Max, UL approved.


   

Model RAB 203

Power Specifications:

Input power: 120 VAC, 60 Hz, 1 Phase, 20 Amps
Pump: 120 VAC, 20 Amp C/B, 1 Hp max.
Compressor: 120 VAC, 10 Amp C/B, 1/2 Hp max.
Alarm: 120 VAC, 10 Amp C/B, Alarm/Control power.

Control Features:
Timer Control: Pump on-time is selectable in 15 minute increments for any combination of times during 24-hour cycle. Override feature turns pump on immediately if water exceeds normal levels (during surges or extended power outages).
Includes Pump Test switch to verify operation of the effluent pump. Individual circuit breakers provide short circuit protection and disconnect feature for compressor, pump, and alarm circuit.

Alarm: Visual and audible (90 dB) alarm for High Water and Low Air Pressure faults. Includes Mute/Test
switch to verify operation of the alarm circuits and to silence the audible alarm until fault is cleared.

Enclosure: 8”X8”X4”poly enclosure rated NEMA 4X (waterproof)

Certifications:
NSF/ANSI Standard 40 approved UL Listed (UL508A) Control Panel for USA/Canada

Model 203 System Component Requirements:
High Water Alarm float –Rated 120VAC, 1 Amp min.
Override float - Rated 120VAC, 20 Amps (1 Hp) min.
Pump float –Rated 120VAC, 20 Amps (1 Hp) min.
Pump –120VAC, 1 Hp Max, UL approved with internal thermal protection.
Compressor –120VAC, 1/2 Hp Max, UL approved.


   

 

 

© Copyright 2003-2010 Septic Solutions, Inc. All rights reserved.
Store Home Page | View Cart | Email Us | Shipping Details | Customer Testimonials | Site Map
Returns & Warranty Claims |  Privacy Policy  | Legal Policies 
  
  
Septic Solutions, Inc.
314 W Center Street
Dieterich, Illinois 62424
PH: 217-925-5992  TOLL FREE: 1-877-925-5132  FAX: 217-925-5375
Secure Site * Most Orders Placed Before 1:30p.m. CST will be shipped the same day.