Little Giant Model ES33W1-10
Cast Iron Submersible Sump/Effluent Pump
1/3 hp, 40 GPM, 1-1/2" Discharge, 3/8" Solids-handling, 115V

The ES33W1-10 pump from Little Giant is an energy-saving, high performance, fully submersible sump / effluent pump, designed for the professional plumbing contractor for use in residential and light commercial applications. Automatic operation is achieved with a piggyback wide angle remote float switch. The ES Series Pumps draw less energy while delivering greater pump flow and overall performance.

• Powerful Permanent Split Capacitor (PSC) motor for high starting and running torque, with upper sleeve and lower ball bearings.
• Mechanical shaft seal assures maximum protection against pump failure
• Epoxy coated cast iron motor housing for corrosion and rust resistance
• Automatic operation with piggyback wide angle remote float switch operates pump in approx. 12" of water and shuts pump off in about 4" of water

Little Giant Eliminator® Model 9E-CIA-RFS
Submersible Effluent Sump Pump
4/10 hp, 57 GPM, 1-1/2" Discharge, 3/4" Solids-handling, 115V

The Eliminator submersible pumps from Little Giant are specifically engineered to handle the tough demanding tasks for effluent and demanding tasks for wastewater and effluent waste transfer with high efficiency and long term dependability. The Eliminators include pumps for use in Residential, Commercial, Industrial and Agricultural applications with light to medium transfer demands. For dewatering, effluent waste, wastewater and handling where such materials must be moved upward from a collection area to sewer or septic lines, or drainage areas, the Eliminators are an ideal solution.

• Handles liquid and solid waste materials up to 3/4" diameter.
• 1-1/2" Discharge
• Cast iron pump housing with protective epoxy coating for corrosion and rust resistance.
• Oil filled motor housing for lifetime lubrication and rapid heat dissipation.
• Stainless steel screws, bolts, handle, and seal assembly.
• Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces).
• Thermal overload protection.
• Automatic operation has 9" - 14" "On" and , 2" - 6" "Off" level range with adjustable Remote Float Switch.

Simer Submersible Sump Pump
Stainless Steel
Model 3983
Ace in the Hole Series
115 volt, 60 HZ, 10' Power Cord
1/3 hp permanent split capacitor motor,
Automatic, Tethered Float Switch,
Capacities to 1800 GPH, 20 foot shut off
1 1/2" Female NPT
This pump is designed for use in a residential sump only. Pump water only with this pump.

1 year warranty
Item #3983
FREE SHIPPING! 
$190.00 Sale $180.00

Little Giant Crawl Space Sump System Model CS-SS
1/3 hp, 1-1/2" MNPT Discharge, 1/2" Solids-handling, 115V

An ideal solution to help prevent water and moisture from collecting in the low areas of your crawl space. Removing this moisture aids in prevention of mold and fungus which causes allergies and odors, as well as moisture damage to wood floors, insulation and metal ductwork. Also helps minimize structural damage from freezing water which can cause your foundation to buckle. The CS-SS can also be used to help prevent water from standing in low lying problem areas such as yard, patio, driveway and other areas around your home.

• Cast iron pump housing with protective epoxy coating for corrosion resistance
• Handles liquid and solid waste material up to 1/2" dia.
• 1/3 HP shaded pole motor with thermal overload protection
• Automatic operation has "on" level at 7"-10" and "off" level at 2"-5"
• Intergal snap action float switch, 18" x 22" perforated basin, light weight and made of corrosion resistant polypropylene
• Structural foam cover with slip fit flanges
• 1-1/4" x 24" sump pump discharge hose kit with adaptors and hose clamps
• 1-1/2" MNPT x 1-1/4" barbed check valve
• Pump is UL and CSA approved

Water Powered Back-Up Sump Pump System
Liberty Model SJ10 SumpJet™

• Works off municipal water supply*
• Accepts 20PSI up to 100PSI inlet supply pressure**
• Fully automatic
• High-output flow rates
• Compact design
• Fully-assembled
• 1-1/2" Discharge
• 3/4" NPT water inlet connection (optional hose connector included)
• UPS approved

The SumpJet™ (Model SJ10) is a water powered back-up sump pump that will protect your basement in the case of a power outage. The SumpJet™ removes 2 gallons of sump water per 1 gallon used. The SumpJet™ is fully automatic, arrives completely assembled, and comes backed with Liberty's standard 2 year warranty.