ORDER
ONLINE OR CALL OUR FRIENDLY SALES STAFF TO PLACE AN ORDER BETWEEN 7:00am
& 4:00pm CST MON-FRI.
Toll Free: 1-877-925-5132 Most orders placed before
12:30 CST will be shipped the same day.
Pump
Not Included.
If you need a pump, please see our sump
pumps available.
PitPlus™
20" x 30" Pre-Assembled Sewage Pump Package
With Bolt-On Flanges 10S Series Model 10S-SMPX-LG 1/2
hp, 2" NPT Discharge, 2" Solids-handling, 115V
For collection of sewage,
effluent, drainage and seepage water. Suitable for homes, farms,
light commercial and industrial use. Pre-Assembled system is provided
completely assembled and ready to be installed.
1/2 HP Sewage
ejector pump handles liquids and solid waste materials up to 2"
diameter
Automatic
operation with dependable remote float switch
Large capacity
(45 gallon) roto-molded polyethylene basin
One-piece
structural foam cover with 2" vent & discharge
Molded anti-torque
pump stops
360 degree
molded handle for easy handling & instillation
4"
Multi-tite and 4" Adaptaflex adapters for cast iron or PVC
inlet pipe
CV-SE2,
2" full-flow check valve
Currently Out
of Stock
Pre-assembled
Sewage Basin Package Click to view a larger image.
Wide Angle
Float Switch
Cord Length:15'
Shut Off: 20'
Amps: 12
Watts: 1000
20 "x 30" Basin
Specs Document in PDF
Little
Giant Crawl Space Sump System Model CS-SS 1/3
hp, 1-1/2" MNPT Discharge, 1/2" Solids-handling, 115V
An ideal solution to
help prevent water and moisture from collecting in the low areas
of your crawl space. Removing this moisture aids in prevention of
mold and fungus which causes allergies and odors, as well as moisture
damage to wood floors, insulation and metal ductwork. Also helps
minimize structural damage from freezing water which can cause your
foundation to buckle. The CS-SS can also be used to help prevent
water from standing in low lying problem areas such as yard, patio,
driveway and other areas around your home.
Cast iron
pump housing with protective epoxy coating for corrosion resistance
Handles
liquid and solid waste material up to 1/2" dia.
1/3 HP shaded
pole motor with thermal overload protection
Automatic
operation has "on" level at 7"-10" and "off"
level at 2"-5"
Intergal
snap action float switch, 18" x 22" perforated basin,
light weight and made of corrosion resistant polypropylene
Structural
foam cover with slip fit flanges
1-1/4"
x 24" sump pump discharge hose kit with adaptors and hose
clamps
1-1/2"
MNPT x 1-1/4" barbed check valve
Pump is
UL and CSA approved
Pre-Packaged
Crawl Space Sump System Click to view a larger image.
Simer Pre-Plumbed Sump Basin Package Ready
to Install!
Ready to install
sump basin, 20 gallon structural foam basin, sealed basin cover
for passive radon protection, 1-1/2" NPT threaded discharge
and 2" NPT vent flanges, 1/2 HP thermoplastic sump pump, capacities
to 2580.
1 Year Warranty
Sealed
Basin Cover
Rugged
Thermoplastic Construction
Easy
Installation (comes with 1-1/2" NPT threaded discharge and
2" NPT vent flanges)
Heavy
Duty 10-Amp Motor
Superior
Construction
Item#
3985C FREE
SHIPPING!
SALE - $325.00
Plumber's Classic Model 3985C
Capacities
to 2580 GPH
Shutoff Head: 23'
Solids Handling: 1/2"
Liquids Handling: Sump
Motor: 1/2 HP
Compact
Drainosaur® Water Removal System
Includes 3-1/2 gallon tank and 1/3 hp Automatic Pump
Compact unit includes
3-1/2 gallon tank, only 10-1/2" high. Automatic submersible
pump with mid-level activating switch and 8' power cord. Consult
factory for specific replacement pump. Basin is IAPMO approved.
Applications: Impractical gravity drainage areas, under sink,
laundry trays
Features:
1/3 HP Shaded
Pole Motor
46 GPM
18' Maximum
Head
Intermittent
Liquid Temp. up to 125°F
1 1/2"
FNPT Discharge
Epoxy coated
cast iron housing
Polycarbonate
Cover
Polypropylene
Volute
Nylon Impeller
Carbon/Ceramic
Shaft Seal
Upper and
lower bearings
Automatic
Operation
Diaphragm
switch Activator
Switch on
- 4" - 7"
Switch off
- 1" - 3"
115V, 50/60Hz,
9 amps
Compact
Drainosaur® Water Removal System
Includes 3-1/2 gallon tank, only 10-1/2" high.
