Aqua Safe Wastewater Treatment plants have been tested according to requirements listed in American National Standards Institute/National Sanitation Foundation Standard #40, and meet or exceed Class 1 characteristics requirements.

Due to its efficiency, the Aqua Safe has become the standard of comparison. It is an inexpensive self-contained wastewater treatment system that features an aeration process, which reduces sewage to an odorless safe discharge in 24 hours. We offer a full product line for sewage treatment in fiberglass or concrete.

The Aqua Safe sewage treatment plant employs an extended aeration activated sludge process. This type of treatment depends primarily upon the use of air that is introduced by passing from the blower to four air lines located around the perimeter of the mixing chamber.

The tanks are made up of an outer mixing tank and a center settling chamber called a clarifier. Raw unsettled wastewater from your home enters directly into the mixing tank where simple hydraulic displacement is accomplished by the introduction of air which promotes the growth of aerobic organisms in much larger amounts than would occur naturally. These break down the organic solids in the wastewater.

From the outer mixing tank or aeration chamber, mixed liquid enters the cone shaped settling chamber, better known as the clarifier, from the bottom. No mixing occurs in this quiet zone where solids separate from the liquid and settle to the bottom of the clarifier and re-enter the mixing chamber. The liquid that separates from the solids in the clarifier continue to flow upward to the discharge pipe.